Epson Printer

How to Fix Epson Printer Error Code 031008?

Epson Printer Error 031008

You can often experience Epson mistake 031008 when turning on your printer. It happens if the printhead or ink cartridges are not inserted into the printer. During the continuing printing session, you can also obtain this mistake. On the printer scanner or inside the printhead, dust can accumulate. You may be facing this mistake as a consequence. Epson Printer Error 031008 there are many such causes. This paper shows the causes together with efficient diagnostic interventions.

Causes of Epson Printer Error Code 031008

Epson error 031008 usually occurs due to the following reasons.
  • When you overload the paper tray, a paper jam occurs and it leads to this error.
  • The printer stops printing when the ink cartridge is empty or has low ink level.
  • You may not have installed the cartridges correctly in the printer.
  • Foreign particles can obstruct the printhead carriage and result into this error.
  • When you do not use compatible cartridges, the printer cannot print and you get this error.
  • The printer cannot recognize the printer if you connect the USB cable to a damaged USB port.
  • A faulty printer driver is another reason for this issue.
Easy Steps to Fix Epson Printer Error Code 031008
Method 1 to Fix Epson Printer WF 4730, -4720, -4750 Error Code 031008
  • Gently remove the cable from the power switch.
  • Hold the power button for approximately 60 seconds.
  • Then plug the power cable from the wall outlet.
  • And leave the power button once the printer is turned on.
  • Try to print and check whether the error code reappears or not.
  • After following the all steps, reset your Epson printer.

Make sure that you only execute this technique when you are certain that you will not make any error while following the process and that a single error may damage your device. Also, share the few simple measures that can be used by any beginner to reboot your Epson printer.

Method 2 to Fix Epson Printer WF 4730, -4720, -4750 Error Code 031008
  • First turn off the printer again.
  • Wait at least 50 to 60 seconds, then plug in the power cord again from the wall outlet.
  • Switch on the device (printer) holds and resume for another 10 to 20 seconds.
  • Then Tap on “OK” and release the resume key.
  • Then take a print once gain to check is the error still appears.
Wondering How to Reinstall or Clean the Printhead of Your Epson Printer?

You can use the automatic and manual method to wash the printhead. The automatic method includes using the rules listed in your device’s printer manual. The manual cleaning process steps will be discussed below:

  • Power off the printer by unplugging the power cords from the wall outlet
  • Take out the ink cartridges from the printer
  • Take the printhead out from the printer by opening the latch behind
  • Take a dry cotton cloth and clean the printhead contacts properly
  • Place the printhead again within the device and use the latch to set the printhead in its correct location
  • Place the ink cartridges again within the printer
  • Take a sample print to confirm the removal of this error code

Printer Customer Support Number +1-866-231-0111 Instant Solutions

Printer Customer Service

By contacting our Epson Printer Repair Service, you can quickly clear any doubts from your mind. Our experts are fitted with the necessary abilities and expertise to solve Epson Error Code 031008 You can avail our services as per your convenience. So, give a call at Epson Support Number  +1-866-231-0111 or mail us to get handy solutions.

Comment here